Recovering my dining room chairs

diy recovered dining room chairs
diy recovered dining room chairs

I may be a tad excited about these, because…

a. I am such a beginner and novice

b. I have never had things I made with my hands turn out that great

c. when I do try a DIY, it’s at best o-kay, but never quite there.

d. I really love doing stuff like this and have been hoping to improve as I work little by little

So.

For the time ever, I am completely happy with this project.

My pictures will not include tutorial instructions. Just because I did it once doesn’t qualify me to do that. = )

Here is the best tutorial I found.

And here is my favorite video.

****

My total cost was about $44.

Broken down it looks like this:

Foam: 17.99

Spray adhesive: 4.19

Batting: 10.19

Fabric: $13

Staple gun: borrowed *Thanks, C and C!* = )

It was actually less than that since I had coupons for money off the total purchase. All in all, it’s not bad to redo four chairs at about $10 per chair. Woohoo!

****

Here are my in the process pictures.

The fabric. I love it! In order to choose from the many fabrics and colors I love, I looked for blue and graphic. At most, these will last five years, so it seemed like a good time to go for something a little more fun.
The fabric. I love it! In order to choose from the many fabrics and colors I love, I looked for blue and graphic. At most, these will last five years, so it seemed like a good time to go for something a little more fun.
The chairs. This one is by far the best. They have served us well, but serving little kids had taken its toll.
The chairs. This one is by far the best. They have served us well, but serving little kids had taken its toll.
Tracing the shape of the particle board on the foam.
Tracing the shape of the particle board on the foam.
The foam has been attached to the particle board with spray adhesive, wrapped and stapled with batting.
The foam has been attached to the particle board with spray adhesive, wrapped and stapled with batting.
The first one is covered. Looking good!
The first one is covered. Looking good!
Waiting to be re-attached.
Waiting to be re-attached.
The easiest way to work on the bottom of the chair. And I didn't think of this for awhile. = /
The easiest way to work on the bottom of the chair. And I didn’t think of this for awhile. = /
They look... for real!
They look… for real!
Back in service. = )
Back in service. = )

If you’ve ever thought about trying this, I say go for it! I wanted to for at least a year.

It was pretty straightforward; definitely took some elbow grease on the removal part. The only thing that actually gave me trouble was re-filling the staple gun. = / By no fault of the equipment, I assure you.

I completed it in twenty-four hours with only six of those hours being actual work time. And there were two, three, or four kids with me most of that time.

Here are eleven things that I think might be helpful for those who have never done it before. Coming from someone who had never done it before. The tutorials don’t tell you everything.

1. Removing the old cover is the hardest part. Perhaps I didn’t have the right tools, but it was almost impossible for me to pull those staples out. I ended up using a screwdriver stuck in between the staples and just prying off the fabric, which did pull many of the staples as well. Between the screwdriver, scissors, and pliers, we got the job done.

2. It is worth it to remove the old. So many things I saw said just to leave it on and recover it, but that to me makes no sense. It’s old. It’s dirty. According to the experts the foam is only meant to last five years anyways, so it’s really worth it to just completely redo it.

3. Follow the steps exactly. I’m the type of person to skip steps that I don’t understand or see useful; however, because this was a major undertaking for me, I followed all the steps. And it turned out the best! Amazing.

4. Cut costs only in ways that will not hinder the quality of the product. From no.3, I saw no point in using spray adhesive. It was just one more six dollar something to buy. But on this end, I get it! And I have it in my supplies now for future projects. I bought my other items over a few weeks time trying to wisely use my Joann’s coupons. This helped a lot. If I had bought a non-decorator type fabric to be more cost-effective like I was tempted to, it would have been bad. By the way, I only do projects like this every couple of months, but it is so worth to get the Joann’s emails and coupons. I highly recommend it!

5. Don’t be afraid to ask questions at your local craft or fabric store. Most of this I had never done or even heard of before. I had to ask about foam, fabric, nails, and batting. And my friend had to figure out how much fabric I would need. I’m sure there will be more questions on the next time around, but I’m learning little by little. It would have been a disaster if I tried to figure it all out on my own.

6. Regarding cutting the foam: I didn’t think cutting high density two-inch foam would be hard, but I should have. Someone online suggested that turkey carvers work really well??? But seeing as I was fresh out of my turkey carver supply, my scissors had to do. What I found was that cutting only about an inch deep on the first cut, and then on the second cut cutting the rest of the way through worked fine. It just took a little longer than I expected.

7. The fact that I couldn’t perfectly straighten my batting while stapling it on worried me that the wrinkles would show through in the finished product, but they did not.

8. Everything I read said to keep it really tight when stapling the fabric so I did it as tight as I possibly could, making the staples about a half inch to an inch apart.

9. The corners you just kind of have to figure out for yourself, but I was happy with how mine turned out.

10. Backing up, when I cut the fabric, I put it all down on the table making sure it was the direction I wanted the pattern facing. Then I put all the pieces down and cut one by one to make sure it was all the same.

11. Last but not least, I need to Scotch Guard these! Especially with kids, Everything has been great so far, but I can hear the clock ticking…

****

We’ve been so happy with these! My husband may or may not have said, “Wow, baby, those look better than I ever expected them to.” = ) It’s okay. They look better than I expected them to as well.

Yay for projects!

*linked up at Thrifty Decor Chick*

Pillows!

If you follow the blog on facebook you might have already seen this picture.

fabric that took me two trips plus forever to pick out
fabric that took me two trips plus forever to pick out

Well, here is what they became!

imageSadly, I’m not the best measurer or cutter, so they were a wee bit small for the pillows I was recovering. I’m still really happy with them, though. It’s a much better match for our white spread than the warm brown and reds.

My sweet and talented friend helped me, i.e. seam-ripped the one I sewed inside out, but I sewed most everything else on her machine. Yay for sewing! It’s been a crazy long time!

fun blue and white chevron
fun blue and white chevron
This one looks a little throwback to me and I love it! It's also the one that originally was sewn inside out. = /
This one looks a little throwback to me and I love it! It’s also the one that originally was sewn inside out. = /
The bright big pattern I was looking for to pull it all together.
The bright big pattern I was looking for to pull it all together.
This fabric is probably my favorite. Unfortunately, I cut this one really small. After seeing what it looked like when we finally got the pillow stuffed into it, I gave it the nickname "fat man in a Miata." I took it out and cut off the original cover to give it a little more room. Now it's affectionately named, "Lumpy."
This fabric is probably my favorite. Unfortunately, I cut this one really small. After seeing what it looked like when we finally got the pillow stuffed into it, I gave it the nickname “fat man in a Miata.” I took it out and cut off the original cover to give it a little more room. Now it’s affectionately named, “Lumpy.”

Imperfect all, but I love them. One small step at a time, right? = )

The cover is the envelope style where you can just put your original pillow in and switch it out whenever you want. There are literally tutorials everywhere for it, and most are probably more specific than the one I used. I just searched on Pinterest for easy pillow cover.

It’s fun to see a little update in our room and think, “Hey, I did that.”

The total cost was about eleven dollars for fabric.

Hmm… let’s see if I can find a before picture here… nope.

Well, I hope you’ve enjoyed the after!

Here’s to bright, cheery colors; just in time for fall. = )

Mr. Giraffe! Paul bought him for me on the day we found out we were pregnant with Hope. It sort of looks like a pregnant giraffe. Still can't figure out why I call him Mister.
Mr. Giraffe! Paul bought him for me on the day we found out we were pregnant with Hope. It sort of looks like a pregnant giraffe. Still can’t figure out why I call him Mister.